- Home
- Equipment
Refine by
4b Braime Environmental Equipment & Supplies
18 equipment items found
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
The M800 Elite Speed Switch is designed to detect belt slip, belt underspeed, stop motion, low speed or zero speed on bucket elevators, conveyors, airlocks, mixers, fans, grinders and many other rotating machines. Totally sealed and simple to calibrate, the M800 Elite works in the harshest of conditions. An inductive sensing device located in the nose of the M800 Elite enclosure will detect a ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
The Whirligig® is a fully guarded target for easy mounting of motion sensors. It is a universal shaft sensor mount suitable for all industry standard cylindrical or DIN style inductive sensors including 4B's M100, M300, and M800 speed switch sensors. The sensor bolts to the Whirligig base plate and the complete assembly either bolts to the machines shaft through a M12 tapped hole, or is ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
Non-contacting extended range magnetic proximity sensor, not affected by dust or material build up, used to detect moving ferrous material up to 100mm away from the sensor. The WDA sensor can be used on bucket elevators to measure speed and alignment by sensing either the metal elevator buckets, or the ferrous bolts attached to plastic buckets. A more specialized use for the WDA switch is as a ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
The TACH3V5 Tacho is low cost electronic display which can be user programmed to indicate speed, distance or time intervals. The unit incorporates a 4 digit red LED display with programmable auto decimal point, in a DIN 96 x 48 enclosure (panel cut-out size: 92 x 44 mm). A relay output is provided for speed control ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
The Auto-Set Remote series RF capacitance point level monitors are designed for high temperature (250°C) or vibration applications to detect high, intermediate, or low levels of liquids, powders and free flowing granular solids stored in tanks, bins, silos or other ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
The Auto-Set series RF capacitance point level monitors are used for detecting high, intermediate, or low levels of liquids, powders and free flowing granular solids stored in tanks, bins, silos or other containers. ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
Suitable for use in ATEX applications. -Recommended for use in equipment / installations where there is a risk of fire or ...
Manufactured by:4B Australia based inAcacia Ridge, AUSTRALIA
The Braime Clamp (BC) series of heavy duty belt splices securely fastens belting on larger bucket ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
Detects the presence or absence of materials. Is used for monitoring the speed of machinery via a speed module or ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
Detects the presence or absence of materials. Is used for monitoring the speed of machinery via a speed module or ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
Detects level or plug situations for bulk granular solids or liquids in tanks, bins, or silos and can be used as a plug or choke detector in chutes, conveyors and elevator legs. Approved for explosive atmospheres: ATEX, IECEx, EAC Ex and CCCEx Zones 20, 21 & 22 for dust Zones 0, 1 & 2 for ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
Type B elevator buckets are generally used for sticky materials at slow speeds and for free-flowing materials at higher speeds and closer ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
Type C elevator buckets are suitable for free-flowing materials, or for materials elevated at slower ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
Detects the presence or absence of materials. Is used for monitoring the speed of machinery via a speed module or ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
The RLI rotary paddle switch is designed to detect high and low levels of bulk granular solids in bins, tanks, silos, and as blockage detectors in spouts. The detection of material is achieved by a rotating paddle. If material impedes the rotation of the paddle, the motor topples of its axis and triggers a contact. The power supply to the motor is cut and the contact signals that a critical level ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
The M300 Slipswitch is an easy-to-use inductive proximity shaft speed monitoring device with an adjustable 0 - 30 second start-up delay, all housed in a 30 mm diameter moulded body. The self-contained unit has a single set point, which signals when the shaft speed has dropped by 20% of normal running speed. It is used for detecting dangerous slow down and underspeed conditions on conveyors, ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
The M1003 Stopswitch is a simple inductive shaft speed monitoring device. The self-contained unit, which signals when the shaft has stopped rotating. It can be used for process control, motion detection and stopped shaft indication. An inductive sensing device located in the nose of the M100 enclosure will detect a metal target. This target can be an existing bolt head or device attached to a ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
The M300 Slipswitch is a simple inductive shaft speed monitoring device. The self-contained unit has a single set point, which signals when the shaft speed has dropped by 20% of normal running speed. It is used for detecting dangerous slow downs and underspeed on conveyors, bucket elevators, airlocks, mixers, fans, grinders and many other machines. An inductive sensing device located in the nose ...